What Is Azimuths Surveying?

What Is Bearings Surveying?

Difference Between Azimuths and Bearings in Surveying

1. Azimuths Surveying Vs Bearings Surveying: Definitions

2. Azimuths Surveying Vs Bearings Surveying: Types of Azimuth in Surveying

1. Policy Azimuths: For work-related purposes, azimuths must be interpreted to as north.
2. Astronomic Azimuths: A azimuth calculated from the astronomical pole in a manner perpendicular to the direction of gravitational at the observation point. Celestial measurements are used to calculate astronomic azimuths.
3. Geodetic Azimuths: A reference to the pole of a spheroid in a plane perpendicular to the spheroid at the start or end of a line. The Laplace correction can be used to calculate geodetic azimuths from astronomic azimuths. Imagine the minor adjustment required in an instrument to keep it levelled over a point if the plumb line is deflected to visualize the difference between astronomic and geodetic azimuths (deflection of the vertical). This minor adjustment will result in a correspondingly minor change in the measured angle.
4. Grid Azimuths: The angle in the plan projection between grid north and the straight line from the point of observation to the point observed is known as the grid azimuth. Only when the point of observation is on the central meridian is grid azimuth the same as geodetic azimuth.

1. True Meridian: The true meridian along a line is defined as a line in which a plane aligns the earth's surface after passing via the true north as well as south extremes As a result, it traverses the true north as well as the south.  Astronomical studies can be used to determine the true meridian's path via a point.
   • True Bearing: it is a line that is in horizontal angle formed by this with the true meridian through those line's poles. The true bearing of a line is a consistent amount because the path of the true meridian via a point remains intact.
2. Magnetic Meridian: A magnetic bearing is measured from a suitable magnetic meridian, a grid bearing from a suitable grid meridian, inferred bearings from a suitable arbitrary meridian, a geodetic bearing from a geodetic meridian, and an astronomic bearing from an astronomic meridian. Observing the needle of the compass yields the magnetic meridian.
   • Magnetic Bearing: The magnetic bearing of a line is the horizontal angle formed by the magnetic meridian passing through one of the line's extremities. It is measured with a magnetic compass.
3. Arbitrary meridian: Any convenient direction towards a permanent and important mark or signals, such as a church spire or the top of a chimney, is an arbitrary meridian. These meridians are used to calculate the relative positions of lines in a small area.
   • Arbitrary Bearing: The horizontal angle formed by a line with any arbitrary meridian passing through one of its extremities. It is measured using a theodolite or sextant.

3. Azimuths Surveying Vs Bearings Surveying: Method of Correcting

1. While spinning the electronic compass 360 degrees, measure a declination value corresponding to a predetermined azimuth angle.
2. Use a sine function to fit the measured declination value.
3. Demonstrate a sinusoidal function.
4. Applying offset, amplitude, and azimuth corrections to the displayed sinusoidal function.

1. Included Angle Method: The traverse's incorporated angles being determined at first, trailed by the traverse's right bearings, that are determined to use the included angles again starting from the line that is unaltered by neighborhood fascination.
2. Error Computation Method: At each survey station, the direction and amount of local attractions are determined. Beginning with a line that is not influenced by local attraction, the corrected bearing of the traverse is calculated. This method is more precise than the included angle method. It is used by the majority of surveyors.

4. Azimuths Surveying Vs Bearings Surveying: Applications

1. Azimuth is used in boundary, control, and topographic surveys, among other things.
2. Azimuths are used in compass and aircraft surveying.

1. A 'bearing' is normally calculated in a clockwise direction starting from a reference direction of 0° and increasing to 359.9 degrees in land navigation.
2. In aircraft navigation, an angle is commonly measured clockwise from the aircraft's track or heading.
3. In naval navigation, starboard bearings are referred to as 'green,' while port bearings are referred to as 'red.

5. Azimuths Surveying Vs Bearings Surveying: Forward and Back

1. The forward azimuth of the line along whereby the poll is being conducted is the forward azimuth, as well as the reversing azimuth is the backward azimuth. Throughout the instance of azimuth, the values for forwarding and backward azimuth would be varied. The backward and forward azimuths can be measured by multiplying or deducting 180°.
2. If the forward azimuth is much less than 180°, the backward azimuth is calculated by adding 180° to the forward azimuth. If the forward azimuth is larger than 180°, deduct 180° to get the backward azimuth.
3. Forward azimuth indicates the line's forward direction, and backward azimuth indicates the line's backward direction. By adding or subtracting 180 degrees, the forward azimuth may be shifted to the back azimuth.
4. If line AB has a forward azimuth of 70 degrees, then the backward azimuth would be 70 + 180 = 250 degrees. If the line AD's azimuth is 230 degrees, the backward azimuth is 230 - 180 = 50 degrees.

1. The forward bearing of a line is the bearing of a line in the direction in which a survey is advancing. Back bearing refers to the bearing of the line in the opposite direction of progress. Forward bearings can be converted to back bearings and vice versa in aircraft surveying.
2. Both the forward and back bearing values will be the same, but the direction will be opposite. The direction will shift from N or S to S or N, and from E or W to W or E

Computation of Azimuths and Bearing in Surveying

Designations of Azimuth and Bearings in Surveying

1. Back Bearing (BB): Backward Bearing refers to bearings measuring in the opposite way of surveying progress, namely in the backward direction of the survey line.
2. Fore Bearing (FB): Bearings measured when surveying, i.e. in the forward direction of survey lines, are referred to as fore bearings or forward bearings.
3. Calculated Bearing: The bearings computed from field observations are referred to as calculated bearings.
4. Observed Bearing: The bearings taken in the field with an instrument are referred to as Observed Bearings.
5. Whole Circle Bearing: Bearings measured clockwise from the north are referred to as full circle bearings. The value ranges between 0 and 360 degrees. Bearings measured from the north or south towards the east or west, whichever is closer, are known as diminished bearings. For each quadrant, the values range from 0 to 90 degrees. It is often referred to as quadrantal bearing (QB).

What is Bearing in Surveying?

What Is Bearing Angle?

Bearing Vs Azimuth

Bearing Degrees

Azimuth Meaning

Bearing to Azimuth

Convert Azimuth to Bearings

Azimuth in Surveying

Azimuth to Bearing

Bearing in Surveying

Azimuth Direction

Reverse Azimuth

Bearing of a Line

Azimuth Bearing

How to Calculate Azimuth?

Convert Bearing to Degrees

Azimuth and Bearings

Calculate Azimuth

How to Read Bearings?

Difference Between Heading and Bearing

Convert Azimuth to Bearing

Azimuth Definition in Surveying

Azimuth Vs Bearing

What Is Azimuth in Surveying?

Bearing and Azimuth

Bearing Definition in Surveying

Define Bearing in Survey

Difference Between Azimuth and Bearing

Azimuth Is Also Known as

True Bearing and Azimuth

Azimuth to Bearing Formula

Azimuth Meaning in Surveying

Grid Bearing in Surveying

Bearings and Angles in Surveying

Bearings and Azimuths

• Bearing Capacity Failure
• Top 10 Best Cement Companies In India 2021
• What Is Stone Masonry | Types of Stone Masonry
• Tension Vs Compression | What Is Tension & Compression
• What is BoQ | BoQ Meaning | Advantages of BoQ | What is BoM
• Soak Pit Design | Health Aspects | Operation and Maintenance of Soak Pit | Applicability of Soak Pit Design
• What Is Superelevation | Superelevation Definition | Superelevation Formula | Calculation of Superelevation in Roads
• Brick Masonry | 6 Types of Bricks | Types of Brick Masonry Work | 4 Types of Brick Bond | 5 Classification of Bricks Based on Size Modification