Sufficient Thickness: Screed thickness is according to the kind of screed planned to put in, the thickness of the floor & its type, and additionally the intensity of estimated traffic.
Mechanical Resistance: To sustain the ultimate load together with the contribution of the load from the kind of floor, certain mechanical resistance must be gained. It’s recommended to employ the screed for flooring in the domestic purpose & must possess a minimum sturdiness of 20 MPa & in business purpose, the sturdiness is ought to be 30 MPa.
Compactness: The concrete screed must be compact & homogeneous on the entire surface & throughout the entire thickness. If the screed shows layers or areas that is malleable or possess lower consistency, it's an indication of poor mechanical characteristics which may result in breakage or the detachment of the flooring.
Concrete Screed Curing and Dimension: Before the installation of the ground, it's necessary to check that the screed is correctly placed and cured. This proper curing will let to finish the shrinkages in it if any. During the curing cycles of concrete screed, they're vulnerable to hygrometric shrinkage. This is due to a part of evaporation of the blending water or the drying process. This shrinkage will lead to curling or cracking of screed& may result in floor detachment.
Crack Free Screed: The cracks in concrete screed are caused because of hygrometric shrinkage & other reasons. Other reasons are because of the presence of an enormous amount of water within the blend. The utilization of aggregates which are very fine or mix with an excessive amount of cement content also ends up in cracks. The sealing of each crack is finished with high precision by means of epoxy resins. These procedures are followed before the installation of the ground. To resist hairline cracks on screed surfaces, an anti-fracture membrane ought to be utilized.
Clean: The screed surface must be made tidy. Dust, dirt on the screed surface must be removed before the installation of flooring. Unclean surfaces will end in the prevention of adhesion between the ground & screed.
Dry: The level of residual humidity must be checked within the screed surface. This value must conform with the most level for that style of covering & must be uniform throughout the entire thickness of the screed. For anhydrite screeds, the amount of residual humidity must be but 0.5%. An electrical or carbide hydrometer is employed for the residual humidity during a screed.
Flatness: The flatness of the screed is checked by laying a straight edge (2 m long) in each of the directions on the surface of the screed. The utmost acceptable tolerance with this straight edge is specified to be 2 mm. If the flatness isn't within the tolerance, then the surface must be leveled off employing a suitable product, before polishing off the ground installation
Smoothness: The suitability of the grade of finish of the surface & also the level of roughness is according to the kind of flooring. For reflective finishing, it's advised to utilize a skimming product that's designed specifically for this purpose.
Durability: A befittingly developed floor screed will outlast the else modules of the building.
Stiffness: Concrete floors generally possesses adequate prudery & does not parry under the applied load which result in generating problems in non-structural elements, e.g. doors.
Energy Efficiency: Concrete floors generally possesses lofty thermal mass & this may be utilized to ameliorate the inner environment within the dwelling & diminish the energy demand for thermal solace.
Speed of Construction: Concrete floors will be developed rapidly. The embrace of concrete floor boosts up the completion of the bottom floor. Precast flooring systems have the surplus superiority of diminishing the bulk of drudgery required.
Damp Resistance: Concrete floor is non-absorbent. This is often utilized for water retaining floors identically as stores.
Cost of Maintenance: Concrete floor is effortless to wash & also the perpetuation expense of concrete floor is affordable.
Fire Resistance: Concrete is non-flammable & is fire-resistant.
The screed for concrete can be bonded to the bottom or laid unbonded onto an acceptable moist resistant veil which is required to be placed up & above the wodge.
Moreover, It can be applied as a floating finish over a film of taut insulation substance.
This is additionally suitable to be utilized with cast-in water pipes to generate underfloor heating.
In case of reinforcement, this will be within a metal mesh, fibres which are conventionally polypropylene, or a fine glass network.
Few manufacturers provide flowing screeds which can be sprayed to achieve level finishes.
Most of those screeds are anhydrite compounds & supported on a CaSO4 binder.
They're brisk to utilize than a conventional sand & cement screed & will be applied to a minimal murkiness of 25 mm if bonded, 30 mm if unbonded, or 35 mm if a floating finish is required.