What Is Drywall?

What Is Drywall Made Of ?

What Drywall to Use in Bathroom?

1. Greenboard: In the bathroom, we need to use the drywall which can resist water and the green board is that type of drywall. It is a green coloured board with a wax finish over it for waterproofing.
2. Cement Board: Cement board is also another type of drywall board which is used in the bathroom. Here, cement is used for waterproofing.
3. Blueboard: It is also used in the bathroom where gypsum crystal is used for better bonding and waterproofing.
4. Whiteboard: Whiteboard is the most common type of drywall which is used in bathrooms. It is generally standard sheetrock.
5. Paperless Type: In other types of drywall, we are using coated paper on the outside of the gypsum board but here we are using fibreglass, instead of paper.
6. Type X and Type C: In this type of drywall the mainboard is covered with glass from both sides. It is done to create the whole fireproofing system.
7. Purple Drywall: This drywall is actually used for mould-resistant and moisture resistant purposes.
8. Soundproof Drywall: This type of drywall is used in the study room, library, etc. Here, polymers, laminated wood and gypsum are used for soundproofing purposes.
9. Soundboard Drywall: This type of drywall is infused with fibre boards which help to create a passage for sound. It is used in musical instruments, amplifiers, speakers, etc.
10. Enviroboard Drywall: This type of drywall is very modern days which is made of recycled cellulose.

Drywall Construction

• In drywall construction, no mortar is used.
• Drywall boards are generally made of plywood, asbestos-cement board, fibre-pulp board, etc.
• Those boards are fixed with building structures with nails, screws or some adhesives.
• After that gypsum mortar is used for plastering. Plastering is done with a trowel which is made of steel. Trowel provides a smooth surface finish.
• Finally, some wallboards or coated papers are attached to this.

Drywall Installation

• At first, we need to measure the place where we need to place the drywall. Measure all length, height and breadth of the place.
• Secondly, create a proper diagram of that place with all measured heights.
• After that, we need to place the drywall. We need to care about the marking sign of white colour which needs to be on the upward side of the drywall. Please use a scale for proper straight-line marking.
• For scoring, the purpose uses a utility knife but don't press it so much because then it will go deeper and crosses the firm line, which will create more problems.
• After scoring it will create a good bump in the back sight and it will cut in half at the place of scoring.
• Then we need to use a utility knife for the cutting purpose of back paper which is attached with drywall.
• Next, we need to take it to the spot for testing purposes.
• After testing thoroughly, use screws for fitting and you need to take care about the right space and interval of those screws otherwise it will create so many problems.
• Use sufficient screws, it will prevent cracks on the drywall.

Drywall Repair Cost Per Square Foot

1. The general cost of drywall repair cost for the whole ceiling and wall is $50 - $100 per square foot.
2. The repair cost for small portion repair is $2 to $6 per square foot.
3. $50 - $400 per square foot rupees are charged for whole or cracks repair in the drywall.

• Frost Wall
• Pony Wall
• Cmu Wall
• Parapet Wall
• Wall Paint Finishes
• Gabion Wall Cost
• What Is a Shear Wall
• Types of Partition Wall
• Alternatives to Drywall
• How to Find Wall load
• Mount TV on Brick Wall
• Disadvantages of Wall Putty
• Weep Holes in Retaining Wall
• Pros and Cons of Sealing Brick
• Bathroom Half Wall Panels
• Long Wall Short Wall Method
• Cost to Repair Drywall Ceiling Water Damage
• Material Cost for 1000 Sq. Ft. House
• How to Cover Concrete Walls in Basement

Drywall Ceiling Repair Cost

Drywall Installation Cost

1. The general installation cost for drywall is near about $1.5 to $3.5 per square foot. The material varies from $0.5 to $0.8 and the labour charges are $1 to $2.7
2. The drywall installation for a 12” x 12” room is near about $580 to $1800.
3. The drywall installation cost of a 2000 sq. ft. house is $8000 to $30,000

What Is Drywall?

How Much Is a Sheet of Drywall?

Drywall Repair

Drywall Installation

1. Selecting Your Drywall
2. Inspecting the Installation Site
3. Measuring and Cutting Drywall for the Ceiling
4. Measuring and Cutting Drywall for the Wall
5. Mudding and Taping Drywall
6. Sanding and Finishing

What is Drywalling used for?

Is Drywalling difficult?

Drywall Installation Cost

Drywall Companies

1. Gold Bond
2. USG Sheetrock Brand
3. Gold Bond Purple Xp
4. QuietRock

Drywall Cost Per Square Foot

Drywall Repair Cost

Outwest Drywall (Company Detail)

Complete Drywall (Company Detail)

Drywall Water Damage Repair

Drywall Water Damage

Drywall Installation Cost Per Square Foot

Wet Drywall Repair

Wet Drywall

Wet Sheetrock

Cracks in Ceiling Drywall

Drywall Cracks

Drywall Repair Cost Per Sheet

Drywall and Painting

• Step 1- Inspect your drywall to see if there are any gouges or dings in it. If you do find any gouges in your drywall, fill them in using drywall mud or another paste solution.
• Step 2- Sand your drywall using a pole sander to smoothen the surface.
• Step 3- Remove dust from your drywall using the suction attachment on your vacuum. Then, take a black towel and run it over the wall, if you see any dust left on the cloth, vacuum your drywall again.
• Step 4- Mix 1 cup of white vinegar into a bucket with one gallon of water and soak a sponge in the mixture. Take the sponge and begin washing your drywall; if the water contained in your bucket turns dark before you are finished cleaning the wall, you need to make a new solution and repeat the process.
• Step 5- Take a fan on the highest speed setting and let it sit directly against the freshly washed drywall. Your drywall needs to be bone dry before you apply any paint to it.

Drywall Repair After Water Damage

Drywall Repair and Painting

Drywall and Insulation Contractors

1. Superior Builders SC LLC
2. Renovations Unlimited
3. Alas-Co General Construction Co Inc
4. Weatherize Alaska LLC
5. North Country Drywall Inc
6. PolySeal Insulation LLC
7. Aurora Service
8. 31-W INSULATION
9. Flawless Construction Inc.

Repair Drywall Ceiling Water Damage

• Step 1: Find the Water Leak
• Step 2: Remove Water-Damaged Drywall
• Step 3: Make Repairs
• Step 4: Prime and Paint
• Step 5: Clean Up

Cost to Repair Drywall Ceiling Water Damage

Drywall Water Damage Repair Cost

Fixing Water Damaged Drywall

Replacing Wet Drywall

• Clear the area. Remove water-soaked furniture and building materials. Also, remove wet carpet and padding, or at least pull it back to allow the floor to air out.
• Take safety precautions. When removing drywall, wear respiratory protection, as some older drywall joint compound contains asbestos. Additionally, remove non-affected electrical outlets before tearing out wall material. Switch off the circuit breakers first. If the outlets have been flooded, remove and discard them.
• Remove damaged materials. Start by deciding how much drywall to cut out. If the water level was less than two-and-a-half feet, remove the wall material to a height of four feet. That helps when reinstalling full sheets of drywall. If the water level was greater than two-and-a-half feet, remove the wall material to a height of eight feet or the ceiling junction, whichever is higher. If you don’t know the water level, inspect the drywall.
• Remove any cracked, crumbling, or sagging drywall. If it’s just damp and the water source was clean (e.g., a burst pipe in your home), you can likely dry it. Depending on the extent of the water damage, you may also need to remove damaged wall studs, flooring, cabinets, and ceilings.

Water Leak Drywall Repair

Repairing Drywall Ceiling After Leak

Fix Water Damaged Wall

1. Repair the Leak: The first and most important step for any water damage repair is to stop the source of the problem. While this is obvious for large leaks, it can be tempting to put it off or downplay the effects if the leak is small.
2. Replace Sagging Drywall: Drywall is very porous, and prolonged exposure to moisture can cause it to lose its structural integrity very quickly. While replacing cracked drywall is a given, you must also accept that you cannot salvage drywall that is blistered or sagging. Use a level tool to find any sections of drywall that are off plumb and replace them with a new piece.
3. Get Rid of Mold: The porous nature of moist drywall makes it an excellent environment for mold growth. If the drywall is still structurally sound but has been infested with mold, you need to kill the mold by scrubbing the drywall. A diluted bleach solution will kill mold without causing damage to the drywall.
4. Cover Water Stains: To cover water stains in drywall, begin by using a paint scraper to remove loose and peeling paint. Next, start sanding the wall with medium-grit sandpaper, and sand with progressively smaller grit until the surface is smooth. You can then prime and paint the surface of the drywall when it is free of imperfections.

• Pile Caps
• Dry Pack Mixture
• Is 1200 Important Point
• What is Bitumen And Bitumens Types
• Trapezoidal Footing Formula with Calculation
• What Is Honeycomb In Concrete | Cause | Cure | Type of Grouting
• Difference Between One Way Slab and Two Way Slab | What is Slab
• Methods of Design | Difference Between Working Stress Method and Limit State Method
• Mortar Vs Grout | What Is Motor and Grout | Type of Motor and Grout | Difference Between Mortar and Grout
• What Is Structural Settlement | Causes For Structural Settlement | What Is Soil Settlement & Foundation Structural Settlement