At the floor level the area of the wall without plinth offsets. Half of the area of such walls should be contained in the plinth area if any common walls exist among two buildings.
The plinth area is estimate up to the outside of the cladding if the building contains columns that are proposed outside the cladding.
The lift well along with landing and the vertical duct for air conditioning are should be estimated.
At the floor level the area of the wall without plinth offsets. Half of the area of such walls should be contained in the plinth area if any common walls exist among two buildings.
50% of the area should be taken into consideration if the area is uncovered with projections.
The bay window is the perfect instance and the recess by cantilevering apart the exterior walls.
25% of such an area should be considered when the recess height is up to 1.0 meters.
And when the recess height is 1.0 to 2.0 meters, 50% of such area should be considered. but the recess height is considered 0 meters, 100% of such area should be considered.
The estimate of plinth Areas of the internal shaft for sanitary installations and garbage chute, telecom, electrical, and firefighting services under the condition that these do not go beyond 2m2 in the area.
The plinth area length of a flat should be calculated to adjacent 1 inch if the measuring unit is in feet. The plinth area length of a flat should be computed adjacent to 0.01 m and the area should be rounded to 0.01 m2. When we estimate the plinth area of a flat the following areas should be into consideration-
The plinth area is calculated as a flat up to the outside of the cladding if the building contains columns that are proposed outside the cladding.
To the calculation of the plinth area of a flat 50% of the area should be taken into consideration if the area is uncovered with projections.
The bay window is the instance and the recess by cantilevering apart the exterior walls.
To calculate the plinth area of a flat at the floor level the area of the wall without plinth offsets. Half of the area of such walls should be contained in the plinth area if any common walls exist among two flats.
And when the recess height is 1.0 to 2.0 meters, 50% of such area should be considered. but the recess height is considered 0 meters, 100% of such area should be considered.
The calculate of the plinth area of the flat the internal shaft for sanitary installations and garbage chute, telecom, electrical, and firefighting services under the condition that these do not go beyond 2m2 in the area.
The lift well along with landing and the vertical duct for air conditioning are should be calculated.
In the Calculation of Plinth Area, Some Things Should Be Considered That's Are?
The plinth area of the ground level of the building should be taken for the calculation of the foundation coast.
The plinth area should be taken for the calculation of super-structure cost knows
The plinth area at the Ground level of the building is to be taken for the calculation of the roof slab finishing.
the Super Structure cost will be 80% of the Super Structure cost of Non-Residential Buildings for the school building.
the rates in Annexure-V shall be adopted, For super-structure in earthquake-prone areas.
The Sea Water Front - Rs.243/m2 up to 10 km distance.
the basic rates as approved in the table above the provisions should be taken.
an extra 25% over the superstructure cost of the respective type of building is to be added for the basement floor.
In the plinth area calculation for the upper floors, an extra Rs.34/ m2 should be added towards each lift charge.
The schedule of rates for works in Jails, Hills, Reserve forests, and other Special tracts, etc. The additional rates allowed shall be due to the above plinth area rates for works in respective areas.
The basic rate of the above data, all the provisions should be added.
The following rates over the basic rate as approved in the above data, the concrete provided in a higher grade in the coastal areas.
around 10% to 20% more than an apartment or a flat's carpet areaRead more
Plinth Beam
Acp Sheet
Low E Meaning
Carpet Area Meaning
Parapet Wall Definition
Residential House Meaning
What Is Dressing of Stone | Types of Dressing of Stone
Floating Slab Vs Monolithic Slab | What Is Monolithic Slab | What Is Floating Slab
RCCFull Form | What Is RCC | Advantages & Disadvantages of Reinforced Cement Concrete | Properties of RCC | What Does RCC Stands for
What Is a Cavity Wall | How to Build a Cavity Wall | Cavity Wall Detail | Cavity Wall Thickness | Cavity Wall Insulation Pros and Cons | Brick Cavity Wall
What Is Oblique Drawing | Oblique Drawing Examples | What Is Oblique View | Oblique Projection | Oblique Shape | Cabinet Oblique | What Is Cavalier Drawing
Which of the Following Is a Way That Slopes Fail | Types of Slope Failure | Geotechnical Failures | Types of Slopes in Geography | Causes of Slope Failure | Slope Stability
What Is Pier and Beam Foundation | Advantages & Disadvantage of Pier and Beam Foundations | Pier and Beam Foundation Design | How to Build a Post and Pier Foundation