What Is Concrete Resurfacing?

• Stamped Overlays
• Pool Deck Resurfacing
• Concrete Crack Repair
• Driveway Repair
• Resurfacing Patios
• Resurfacing Products

How to Resurface Concrete?

Step 1. Concrete Cleaning

• Concrete cleaning is done by a mechanical machine of high pressure of near about 3500 psi.
• This process is done to remove dust, algae and other hazardous materials because a cleaned surface has a better power of bonding with new materials.

Step 2. Patch Spelled Areas

• In damped concrete, resurfacer is used to fill those patches.
• Resurfaced is made by one part of water with seven-part of resurfaced in a five-gallon bucket.
• Then we need to fill up that place and smooth the area with a trowel.

Step 3. Spread the Resurfacer

• Walkway joints are filled with resurfaced.
• The resurfaced is only workable for 20 minutes.

Step 4. Trowel Operation

• Trowel operation is done to spread the resurfacer.
• The thickness of the resurfacer is ¼ to ⅛ inch.
• We need a total of six hours to use it again.

Concrete Resurfacing Material

• A unique blend of Portland cement
• Sand
• Polymer modifiers
• Many other additives

• It must be water-resistant
• It must be non-slippery
• It should be UV resistant
• It should have the ability to withstand the freeze that cycle
• It should have the ability to resistant against chemicals
• It should have the ability to overcome the heavy foot and vehicle traffic.

• Overlay Mix
• MT resurfacer
• Overlay foot mixes
• Versa-Crete resurfacer smooth mix
• Floor top STG
• Top Cap resurfacer

Concrete Repair and Resurfacing

Concrete Repair

• Epoxy Injection
• Routing and Sealing of Cracks
• Stitching
• Grouting Method

#1. Epoxy Injection

• Epoxy injection is a type of concrete repair process. It's applied where the concrete cracks are not more than 0.002 inches or 0.05 mm.
• In this process, epoxy resins are entered into the cracks and exposed on the concrete surface.
• Epoxy injections are used in building cracks repairing, dams, bridges and other structures. Epoxy resin techniques need a high skill full labours.

#2. Routing and Sealing of Cracks

• Routing and sealing are applied where structural repair is not applied.
• This is applied where cracks are in the face of the concrete. Sealing is useful in a plane surface than a curved surface.
• The materials used in sealant are epoxies, urethanes, silicone, polysulphide, asphaltic material, polymer mother, etc.

#3. Stitching

• Stitching is another method of concrete repair technique.
• In this process, two holes are drilled in both sides of the concrete cracks. After that, steel bars are used to maintain the crack.

#4.  Grouting Method

• In the gravity dam, wide cracks are developed in the dam's wall.
• This process is by Portland cement grout. This method is very effective to prevent water leaks.

Concrete Resurfacing

• Concrete resurfacing is the process to provide a brand new look to damaged concrete.
• In the process of resurfacing of concrete, a concrete coating is applied on the surface of existing concrete.
• Concrete resurfacing is a time-consuming process, and it's very much labour-intensive process so, it's a little bit expensive also.
• In this process, a special bonding agent is added to the cement mixture to get a smooth cementing surface.

Types of Concrete Resurfacing

• Stamped Overlays
• Pool Deck Resurfacing
• Concrete Crack Repair
• Driveway Repair
• Resurfacing Patios
• Resurfacing Products

#1. Stamped Overlays

• Stamped overlays is a type of concrete resurfacing which gives us aesthetic beauty and texture. This is only used on existing concrete.

#2. Pool Deck Resurfacing

• This is the process to repair damaged concrete. This process is a tiny layer of cement, sand, polymer and resin.

#3. Concrete Crack Repair

• This is one of the most important processes where repair materials are poured into cracks.

#4. Driveway Repair

• Naturally driveway doesn't need repairs, but sometimes it requires.

#5. Resurfacing Patios

• This is done by the cement-based overlay, which is durable and strong.

#6. Resurfacing Products

• In this type, there are many types of readymade resurfacing products available in the marketplace.

What Is Concrete Resurfacing

Concrete Resurfacing Material

Can You Resurface Concrete?

How Much Does It Cost to Resurface a Concrete Driveway?

Can You Resurface a Concrete Driveway?

Concrete Resurfacing

Concrete Resurfacing Products

How to Resurface Concrete?

1. Clean the surface
2. Repair any damage
3. Apply a bonding agent
4. Mix the resurfaced
5. Apply the resurfaced
6. Texture the surface
7. Allow the resurfacer to dry

Concrete Resurfacing Before and After

1. Driveway
2. Pool deck
3. Patio
4. Sidewalk

Resurface Concrete Steps

Best Concrete Resurfacer

Concrete Repair and Resurfacing

Ways to Resurface Concrete

Best Concrete Resurfacing Products

Concrete Resurfacing Portland

• Difference Between Marble and Granite | What Is Marble and How Is It Made | What Is Granite and How Is It Made
• What Are Walls | What Is Interior Walls | Types of Interior Wall Materials | Types of Wall Construction | Types of Load Bearing Wall
• Building Layout | How to Building Layout | What Is Method of Layout of Building | Control Lines of Construction | Construction Layout
• Emulsion Paint Vs Oil Based Paint | Purpose of Providing Paints | Properties of Good Paint | Properties of Good Paint | What Is Oil Based Paint
• Difference Between Sketching and Drawing | What Are Conceptual Sketches | Architecture Concept Drawing | Types of Drawings for Building Design
• Definition of Shear Force and Bending Moment | What Is Shear Force | What Is Bending Moment | Relation Between Loading, Shear Force & Bending Moment