Information of Building Dimensions | What Is the Dimension of Building | Building Dimension PDF

Information of Building Dimensions

What Is the Dimension of Building?

Read more
  • What Is a Contour Interval
  • What Is Tile
  • What Is the Difference Between a Shower Pan and a Shower Base?
  • What Is a Window Panel
  • Type of Arch
  • What Is a Frame Structure
  • What Is the Measurement for a Queen Size Bed
  • What Is Considered Livable Space
  • What Is One Way You Can Save Electricity?
  • What Is Mdf Mean
  • How to Build a Foundation on a Slope
  • What Is a Bundle of Shingles
  • What Is a Gallon of Water Weigh
  • What Is Overhang
  • What Is Sand Blasting
  • What Is a Span Bridge
  • What Is the Little Black Diamond on a Tape Measure
  • What Is a Louvered Door
  • What Is a Spread Footing
  • What Is Leveling
  • Different Types of Beam
  • What Is Pedestal
  • What Is Plumbing Fixtures
  • What Is Slab Construction
  • What Is Calacatta Quartz
  • What Is Auxiliary View
  • Sheepsfoot Roller
  • Live Load Vs Dead Load
  • What Is 1 Flight of Stairs
  • What Is Refractory Cement
  • Dry Pack Concrete
  • What Is Luminous Flux Vs Lumens
  • What Is a Frost Wall
  • What Is an Undercoat
  • What Is Road Pavement
  • Arch Foundation
  • What Is a Stair Landing
  • What Is Stone Masonry
  • What Is a Spandrel Beam
  • What Is Pier and Beam Foundation
  • What Is Levelling
  • What Is a Pile Cap
  • What Is a Mat Foundation
  • What Is a Floating Slab
  • What Is the Purpose of Foundation
  • What Is Modulus of Rupture
  • What Is a Flush Door
  • What Is Residential Construction
  • What Is the Best Foundation for a House
  • What Is a Benchmark in Surveying
  • What Is a Engineering Drawing
  • What Is an Admixture
  • What Is the Standard Size Water Supply Line
  • What Is the Difference Between Tension and Compression?
  • What Is a Tremie
  • What Is Tributary Area
  • What Is Shoring Construction
  • What Is a Cason
  • What Is Wall Putty
  • What Is the Difference Between Mortar and Concrete
  • What Is Bhk
  • What Is Sbc of Soil
  • What Is Water Proofing
  • What Is Mix Design of Concrete
  • What Is Fine Aggregate
  • What Is Retention Money
  • What Is Design Mix
  • What Is Isometric Scale
  • What Is Development Length
  • What Is Superelevation
  • What Is Wall Made Of
  • What Is Micro Piling
  • What Is Soil Stack
  • What Is a Half Wall Called
  • What Is Flagstone
  • What Is a Cinder Block
  • What Is Plinth
  • What Is Floors
  • What Is a Parapet in Construction
  • What Is Concept Drawing
  • What Is Camber in Road
  • What Is M30 Concrete
  • What Is Centering in Construction
  • What Is Well Foundation
  • What Is Tie Beam
  • What Is the Full Form of Rcc
  • What Is Lintel Level
  • What Is Varnish Used For
  • What Is Bod
  • What Is Road Alignment
  • What Is Grade of Concrete
  • What Is the Unit of Weight
  • What Is Epoxy Flooring
  • What Is False Ceiling
  • What Is Two Way Slab
Read more

Standard Dimensions Below Are Building and Building Design,

  1. The minimum foundation depth, a crucial aspect when considering the bold and underline(size of building), is kept 1 metre below ground level. The foundation's width should be so large that the soil's stress is securely carried.
  2. Minimum plinth dimension: Height of a plinth can be between 300 mm to 600 mm. The minimum plinth height is 600 mm for accommodation at water-prone and important buildings. The building has a majestic appearance with a larger plinth height.
  3. The area of the plinth should be at least 1,2 times the building floor area. The standard brick depth of 100 mm is 100 m wider than the previous one, and the base depth is 100 mm lower.
  4. When a certain number of bases are to be supplied, their depths are preferably equal. The width of the base bed for cement concrete = the width of the base of the brick just above the bed of concrete + 100 mm + 100 mm. (i.e. 100 mm for the concrete bed is the minimum offset).
  5. Minimum base width = 2t + 2j
      • Where, t = Wall thickness just above the basement (Not less than 200 mm )
      • j = concrete offset (Not less than 100 mm)
Read more
    1. Damp-proof course 20 to 25 mm in thickness.
    2. The cement floor thickness is at least 100 mm plus floor finish. Typically, the floor finishes with cement morter or tiling are 10 mm to 20 mm thick.
    3. The height of the ceiling (i.e. headroom) should be between 3000 mm and 3600 mm for the main rooms of the residual structure. For bath and W.C. the ceiling height may be 2000 mm to 2750 mm. (The building's maximum height depends on structure types)
    4. The carpet should cover 50 to 65 percent of the total floor space.
    5. A residential building's main entrance door should be 1000 mm x 2100 mm in size. Other doors should be a minimum of 900 mm wide and 2000 mm tall. With the single-leaf shutter, garage doors are 2500 mm x 2300 mm, and W.C. and bathroom doors are 600 mm to 750 mm x 1800 mm.
    6. The size of the windows is determined by the overall area of the needed window apertures.
    7. It's important to remember the following guidelines:
      • Window width = 1/8 (room width Plus room height).
      • For excellent illumination, the glass area in windows should be 10% to 20% of the room's floor area.
      • For every 30 cubic metres of interior room space, at least one square metre of window area should be supplied.
      • The minimum window size is usually 750 mm by 1000 mm.
      • To ensure enough ventilation for every livable room, a ventilator must be at least 1000 mm × 500 mm in size. A minimum of 450 mm x 300 mm should be used for the bath and the toilet. If the depth is larger than 450 mm, privacy is lost.
Read more
      1. Stairs
        • In a residential construction, the rise ranges from 130 to 190 millimetres.
        • In an office building, the rise is between 125 and 150 millimetres.
        • For public structures, the range is 275 mm to 350 mm.
        • For residential buildings, go from 250 to 300 mm.
        • The following guidelines are used when choosing a building's rise and tread:
        • T x R = 39000 to 48000 T x R = 550 to 650
        • The width of steps in residential structures is 900 mm, whereas in public buildings it is 1000 mm.
        • (Total Floor Height / Riser Height) x (Number of Risers)
        • The number of treads equals the number of risers minus one.
      2. R.C.C. I lintel beam thickness ranges from 100 mm to 250 mm, with 150 mm being the most common.
      3. The thickness of an R.C.C. roof slab ranges from 100 mm to 150 mm (100 mm is more common), while that of sunshades ranges from 25 mm to 50 mm.
      4. Sunshade projection length in centimetres: sunshade projection through 450 mm or 500 mm beyond the external wall facing.
      5. In residential houses, the width of the verandah ranges from 1.8 m to 3 m, while the width of the passage ranges from 0.8 m to 1.2 m.
      6. The wall should not reach less than 0,60 m above the finished floor, and should not exceed 1,2 m.
      7. Height of different building materials and standard building height
      8. The mezzanine floor area may not exceed one-third of the floor area or the mezzanine floor area.
      9. The headroom measured at the underside of the mezzanine floor should not exceed 2,2 m from the floor's surface to any point.
      10. The room height shall not be less than 3.00 m in the apartment building provided that it is not less than 2.4 metres in the case of air-conditioned rooms.
      11. At least one water closet must be provided for each building.
      12. The bathroom area shall not be less than 1.50 m2 and the latrine carpet area shall not be less than 1.1 m2, one side not less than 1.0 m2
      13. In so far as there is no less than 2.2 square metres, one side no less than 1. 1 metre, in the area of combined bath and latrine: the height of the bath or latrine shall not be less than 2,20 m.
      14. Ramps shall be placed on the slopes not greater than one in 10 if provided as a substitute for the steps and such ramp shall satisfy all staircase requirements and shall be surfaced with the approved non-slippery materials.
      15. Any hallway, verandah, or walkway in a building must have a clear width of at least 1.0 metres at all times.
      16. Every structure intended for human habitation must have an emergency exit large enough to allow residents to safely evacuate in the event of a fire or other emergency.
      17. The location of emergency exits on each floor must be such that the total travel distance for each occupant does not exceed 30 metres.
      18. Part IV, Fire Protection in the National Building Code of India, 1983, and amendment No. 3 under Fire Protection Annexure 11 should apply to all fire protection standards.
      19. Exit widths shall be 50 cm, clear width 25 cm, and clear width less than 25 cm for exit widths. The output width unit used to measure the capacity of any exit shall not be counts for exit width.
      20. For every building with residential occupancies over three floors above the floor, other than residential occupancies over 2 floors above ground level, fire escape stair case should be provided.
Read more

Building Construction PDF: Click Here

Building Code Basics Residential PDF: Click Here

Read more

Building Dimensions

Sr.No.Name of RoomMaximum DimensionMinimum Dimension
1Dining Room4200 mm to 4800 mm3600 mm x 4200 mm
2Kitchen3000 mm x 3000 mm2500 mm x 3900 mm
3Bath / WC Combined1800 mm x 2500 mm1800 mm x 1800 mm
4Bath (Separated)1200 mm x 1800 mm
5W. C. (Separated)1200 mm x 1200 mm
6Guest Room3000 mm x 3000 mm3000 mm x 3600 mm
7Drawing Room or Living Room5800 mm x 7200 mm4200 mm x 4800 mm
8Bed Room or Master Bed Room4200 mm x 4800 mm3000 mm x 3600 mm
Read more

Fire Stair Dimensions

Fire Escape Staircase Dimensions

Read more

Portable Classroom Dimensions

Commercial Staircase Width

Read more

Standard Stair Width Commercial

Elevator Size Ada

Read more

Standard Size of Elevator for Commercial Building

Average Tiny House Size

Read more

Minimum Stair Width

Sizes of Buildings ( Metal Building)

Read more
  • 30' X 30' Metal Building
  • 30’x40’ Metal Building
  • 30' X 60' Metal Building
  • 30’x50’ Metal Building
  • 40’x40’ Metal Building
  • 40’x50’ Metal Building
  • 40’x60’ Metal Building
  • 50’x50’ Metal Building
  • 50’x60’ Metal Building
  • 50’x80’ Metal Building
  • 50’x100’ Metal Building
  • 60’x50’ Metal Building
  • 60’x60’ Metal Building
  • 60’x100’ Metal Building
  • 100' X 200' Metal Building
Read more

Construction Dimensions

Dimensions Building

Read more

Average Commercial Building Size

Dimensions of a Building

Read more
  1. Dining Room: Maximum Dim=4200 mm to 4800 mm, Minimum Dim=3600 mm x 4200 mm
  2. Kitchen: Maximum Dim=3000 mm x 3000 mm, Minimum Dim=2500 mm x 3900 mm
  3. Bath / WC Combined: Maximum Dim=1800 mm x 2500 mm, Minimum Dim=1800 mm x 1800 mm
  4. Bath (Separated): Minimum Dim=1200 mm x 1800 mm
  5. W. C. (Separated): Minimum Dim=1200 mm x 1200 mm
  6. Guest Room: Maximum Dim=3000 mm x 3000 mm, Minimum Dim=3000 mm x 3600 mm
  7. Drawing Room or Living Room: Maximum Dim=5800 mm x 7200 mm, Minimum Dim=4200 mm x 4800 mm
  8. Bed Room or Master Bed Room: Maximum Dim=4200 mm x 4800 mm, Minimum Dim=3000 mm x 3600 mm
Read more

Average Building Dimensions

  • What Are the Basic Components of a Stairway
  • Well Point System | Types of Well Point System | Well Point Dewatering | PVC Well Point | Well Point Installation | Well Point for Shallow Well
  • What Is a Cavity Wall | How to Build a Cavity Wall | Cavity Wall Detail | Cavity Wall Thickness | Cavity Wall Insulation Pros and Cons | Brick Cavity Wall
  • Emulsion Paint Vs Oil Based Paint | Purpose of Providing Paints | Properties of Good Paint | Properties of Good Paint | What Is Oil Based Paint
  • What Are Weep Holes | Need for Weep Holes | Foundation Weep Holes | Types of Weep Holes | Weep Holes In Retaining Wall | Window Weep Holes
  • What Is Workability of Concrete | Factors Affecting Workability | Test |Errors
Read more

Did you like this story?

Please share by clicking this button!

Visit our site and see all other available articles!

Civil-Jungles