The quality of a building made of suitable building materials types has a big impact on the life of the building, including its ability to function as earthquake proof houses. Many problems arise in construction when materials are cheap and low. And the life of the house will not last long.
The choice of the right building materials to use is often overlooked. Of building materials.
Mud is the result of water and soil dence mixing. The formation of mud is due to soil erosion after rainfall near rivers or water sources. After drying for a while, the mud hardens to form mud.
Mud is a semi-liquid material used in building construction. The use of mud sticks to coats, seals, or other materials due to its properties. Depending on the use of mud, it has been given many different names. The various names include slurry, mortar, plaster, stucco, and concrete.
In the early years, stone, mud, and other materials were used as building materials. In the old days, mud was used to fill the gap between bricks and stone.
A building built using mud as a building material was not as strong as concrete, but a mud house is able to keep the house cool during the summer.
In general, materials such as stone, gravel, lime, and bitumen can be mixed with soil and water to form walls, floors, and ceilings.
Sand is naturally composed of mineral particles due to the erosion process of the rock. The most common component of sand is silica, which is usually found in the form of quartz.
The formation of sand is due to changes in the climate of the rocks. According to natural resources, sand is classified as follows: Pit sand, River sand, and Sea sand.
Aggregate is a building material. Aggregate is used to form bases for roads, bridges, and buildings. Aggregate is used in over 90% of asphalt pavements and up to 80% of concrete mixes.
The aggregate size of building materials ranges from 4.75 mm to 18 mm. Aggregate with rough and non-glassy texture helps to get good strength with cement paste.
Rock is a naturally available material on the construction site. It can be used in construction and outdoors in various places. The stone used for construction should be hard, durable, and free from cracks. So that the strength and durability of the rock do not change.
Stone for construction can be used in different places depending on the need of the property.
There are many different types of stones available in different places. Stones such as basalt, marble, limestone, sandstone, quartzite, travertine, slate, guinea, laterite, granite, etc., can be used as building materials.
Stone is the oldest building material used in the world. Rock is used in important monuments and buildings due to its strength and durability. It is also used in places of worship, forts, and palaces.
Wood is the most useful and important building material for construction. It is very important to choose from different types of timber.
Timber must be strong, tough, and durable to be used for various purposes in the building. The use of wood in wooden doors or windows contributes to interior decoration and appearance.
The use of teakwood is most appropriate in the construction of buildings. Lakewood is naturally durable with good quality. Builders are preferred for their various characteristics, durability, and natural appearance.
Cement, often sourced from a calcium silicate ceiling manufacturer, is used for construction as a binder.. Cement used in construction is usually based on lime or calcium silicate. Which can be classified as non-hydraulic cement and hydraulic cement based on the process of setting cement in the presence of water.
Non-hydraulic cement does not set in wet conditions or underwater. This type of cement reacts with carbon dioxide in the air.
Hydraulic cement is formed due to a chemical reaction between dry elements and water. This type of cement is very durable in water and resistant to chemical attacks.
Glass, including polycarbonate roof domes, is a product of a mixture of sand and silicates. Glass is widely used as a building material in modern times.
Glass is commonly used in window panels. Which has a transparent surface. The purpose of this is to bring light into the building. And is able to keep outdoor weather.
Nowadays glass is used for architectural purposes in the outer part of the height of modern buildings.
Gypcrete is commonly used in wooden frames as a building construction material. It is also used in concrete construction for fire rating, noise reduction, heat absorption, and floor leveling.
Gypcrete is used as a flooring material by architects and designers. Gypcrete is used as a building material due to its properties and advantages.
Fabric, especially in large fabric buildings, is used in many places as a building material. Nowadays, fabric structure is used to provide users with a variety of aesthetic building designs.
Fabric structures are a type of tensile structures. The fabric structure can be given a three-dimensional shape. Fabric Structures can be used as a ceiling, shading, or decoration. Fabric structures can cover a larger area without columns than traditional roof systems.
Usually, fabric structures are made from real fabric material.
Usually, the fabric can be coated and laminated with synthetic materials to increase its strength. In addition, properties such as durability and environment can be provided.
Steel is used in construction as a strong building material with excellent strength in both tension and compression, often used in manhole shutters.It is especially used for the infrastructural structures of tall buildings and large industries.
Structural steel is available in various standard shapes such as angles, c- beams, and C-channels in various elements. These shapes can be designed into any shape by welding with each other. Since steel is capable of resisting large forces and distortions, it can be used to make high-strength bolts for fixing the structure.
Steel is the most expensive building material, so it is the responsibility of the structural engineer to choose the economic size and shape according to the actual load of the building.
Steel is used as reinforcement in concrete to provide tensile strength to the component. Steel reinforcement is used because the concrete is weak in tensile strength.