What Is Stone?
Important Point
Stones were some of the essential construction materials in civil engineering. Stones are formed of rocks that comprise the crust of the earth and therefore have no regular shape or chemical composition and are mixes of 2 or even more minerals.
The mineral is a material produced by an inorganic materials mechanism which exhibits a distinct chemical composition, including molecular structure. They’re solid, robust, yet they look like a descent.
Classification of Stones:
The characteristics of a stone which specify its functionality for building construction are durability, strength, hardness, and presentation. The consistency of a stone could be reliably and roughly determined by examining its source as well as chemical structure, as well as the outcomes of tests and experiments.
The rocks were categorized as:
- As per geological origin, rocks are categorized as igneous, sedimentary, and metamorphic.
- As per physical type, rocks are categorized as stratified, unstratified, and foliated.
- As per chemical structure, rocks are categorized as siliceous, argillaceous, and calcerous.
#1. Classification of Stones: As Per Geological-
That’s the grouping of rocks mostly on the basis of its source as well as composition. In this principle, the rock is categorized as:
- Igneous Rocks,
- Sedimentary Rocks,
- Metamorphic Rocks.
#1.a. Igneous Rocks-
Igneous Which, rock developed when the substance is liquid or partly molten, termed magma, cools then solidifies. The internal surfaces of the planet are at such an elevated temperature, allowing the mass of silicate to melt. The melting mass of silicates is named magma, which has been pushed up then exposed to the earth’s surface.
Such an eruption is referred to as a volcanic eruption. This same magma emitted cools down and solidifies into a crystalline rock. Rocks produced inside the earth being considered intrusive or plutonic rocks since the magma through which these develop also intrudes further into the surrounding rock.
Such rocks produced on the earth’s surface are considered extrusive rocks. In extrusive rocks, the magma had also extruded or erupted, via a volcano or maybe a crack. Geology enthusiasts can distinguish amongst intrusive versus extrusive rocks from the size of its crystal.
Crystals in intrusive rocks are greater than crystals in extrusive rocks. The crystals within intrusive rocks become heavier, so the magma which creates these is protected either by underlying rock and hence steadily cools down. Such a slow cooling allows the crystals time to get bigger.
Extrusive rocks cool easily, since crystals are quite thin. For certain instances, molten magma cools so fast that perhaps the crystals can not have time to develop, as well as the magma solidifies in an amorphous shell, including such obsidian.
#1.b. Sedimentary Rocks-
Sedimentary rocks were produced mostly by accumulation of its minerals accumulated in each of the aforementioned three ways
- Mechanical degradation and eventual accumulation of many other stones, typically by water, like in the situation of sandstone and limestone;
- Its behavior of animals and plants, like in the situation of coral;
- Chemical deposition of minerals through water, like in the situation of gypsum.
Many sedimentary rocks being distinguished by parallel as well as discordant bedding, which indicates differences whether in the amount of deposition of the material or perhaps the composition of the material being settled. Sedimentary rocks are categorized as per the source in mechanical and chemical sedimentary rocks.
Mechanical rocks, or fragmentary rocks, have been formed of mineral composite particles either by mechanical breakdown of many other rocks as well as transported, all without chemical decay, by flowing water. so they really are transferred to wider sources of water in which they are stored in deposits.
Shale, sandstone as well as conglomerates are typical sedimentary rocks of mechanical origins. Components that form chemical sedimentary rocks can comprise of residues of small marine species precipitated mostly on the ocean bottom, like in the situation of limestone.
These could also have been diluted with water flowing thru the parental rock formation and instead washed into the sea or lake by precipitation again from solution. Halite, gypsum as well as anhydrite are produced either by evaporation of dissolved salts as well as the resulting accumulation of salts.
Owing to the process of formation, sedimentary rocks are typically porous and therefore can be readily spread all along bedding. Such characteristics can differ based on the characteristics of the sediment as well as the bond form.
#1.c. Metamorphic Rocks-
Metamorphic Rock is often a category of rock produced whenever the rock content encounters extreme pressure and temperature in the earth’s crust. Metamorphic rock occurs as pre-existing rocks experience mineral and structural variations due to high pressure and temperature. This modifications take place in the rock as it is firm.
Changes can happen when the rock remains firm since each mineral is durable just above a certain temperature and pressure range. When a mineral is heated or compressed outside its strength range, it starts to break down but becomes another mineral.
The mixture of minerals is effective across particular pressure and temperature scales. At temperatures and pressures above the specific range, the materials condense to produce various combinations of minerals. These combinations of minerals are termed mineral assemblages.
In such a metamorphic rock, one mineral assemblage switches to an other the atoms shift in a solid form then combining to create new minerals. This transition through one mineral assembly or the other is considered metamorphism.
When temperature and pressure rise, the rock increases power which stimulates the chemical reactions which also trigger metamorphism. When temperature and pressure drop, the stone cools; sometimes it doesn’t even have enough energy to return to reduce temperature and reduced pressure mineral assemblies.
In such a way, the rock is trapped in a situation which is typical of all its former high-temperature as well as high-pressure climate. The scale, shape, including arrangement of mineral grains in such a rock is termed the rock texture.
Most of the metamorphic rocks are known after their key texture. Textures offer important insights about how the rock was developed. If the pressure and temperature of that same metamorphic rock rise, the size of the mineral grains increases dramatically.
Also, Read: What Is Dressing of Stone | Types of Dressing of Stone
#2. Classification of Stones: As per Physical Form–
Rocks are often marked as stratified and non-stratified, based on its composition. Igneous and metamorphic rocks are unstratified, such that, these were not organized in almost any homogeneous way in layers and strata, and also have the component elements mixed up.
Sedimentary rocks become stratified or developed in a sequence of parallel layers once they are collected out of water. The surfaces were initially horizontal because in most situations they are somewhat inclined as well as curved caused by the actions of the troubling forces.
Sedimentary rocks consist of grains joined together with a cement medium, but its strength as well as longevity rely on the composition of the cementing content.
Also, Read: What Is Quarrying of Stones | Methods of Quarrying | Selection of a Site for Quarrying of Stones
#3. Classification of Stones: As per Chemical Composition–
Rocks can also be graded as siliceous, calcareous as well as argillaceous, dependent on the chemical characteristics of the soil containing its key components. Silica is the primary constituent of the earth in silica stones; Lime carbonate seems to be the primary element in calcareous stones.
Use of Stone:
The use of stone are as follows.
- As in the primary material for its foundation of structural engineering activities as well as for the building of walls, arches, buttresses including dams.
- Stonemasonry in areas where it would be readily accessible.
- As the total aggregate of concrete cement.
Also, Read: Properties of Stones | Requirements of Good Building Stones
Application of Stone:
The application of stone are as follows.
-
- Stones are being used for basic preparing of various constructions and very often serve as essential Stones are being used for basic construction work such as base, floor coverings, masonry work, respectively.
- Stones are being used for ornamental as well as decorative elegance of various styles of buildings.
- Normally, these are being used for rail ballast and also as aggregates for cement including lime concrete.
- Stones are being used in the production of iron.
- Stones are often used to create fireproof buildings.
- Normally, stones have been used as building materials for various buildings, such as dams, foundations, bridge piers, ports, etc.
- Limestone serves as a fluid in the processing of cement and lime.
- Stones can be used for the simple planning of various constructions but often regarded as an important product for road as well as footpath construction.
- A stone sheet will be used as a damp proof course (DPC) in components built up of many other structural units, including bricks, hollow stones, respectively.
Also, Read: What Is Stone | Type of Stones | Uses of Stones
Advantages of Stone:
The advantages of stone are as follows.
- Such rocks are present in nature in a broad variety of styles and colors and also have a distinctive elegance.
- Natural stones are thermal insulation and thus no modification is needed.
- Some other characteristics of natural stone are versatility as well as formability on a number of materials.
Also, Read: Stone Masonry vs Brick Masonry | What Is Brick Masonry | What Is Stone Masonry
Disadvantages of Stone:
The disadvantages of stone are as follows.
- The mass of the natural stone is greater than that of the artificial stone, but also being used in the construction is time – consuming process.
- Weather and climate conditions influence the rock structure and trigger cracking, mildew as well as dandruff to the soil.
- Natural stones were stripped from of the structure of the building by atmospheric as well as non-stick agents across period.
Also, Read: Classification of Stone Work | What Is Stone Masonry
What Is Stone?
A rock is any naturally occurring solid mass or aggregate of minerals or mineraloid matter. It is categorized by the minerals included its chemical composition and the way in which it is formed. Rocks are usually grouped into three main groups: igneous rocks, sedimentary rocks, and metamorphic rocks
Use of Stone
- As a principal material for foundation of civil engineering works, and for the construction of walls, arches, abutments, and dams.
- In stone masonry in places where it is naturally available.
- As coarse aggregate in cement concrete (crushed form of rock).
Application of Stone
Stones are used for the ornamental and architectural beauty of different types of structures. Generally, they are used for railway ballast and as an aggregate in cement and lime concretes. Stones are used in the manufacturing of iron. Sometimes, Stones are used for making fireproof structures.
Also, Read: What Is Stone Masonry | Types of Stone Masonry
Advantages of Stone
- Durability.
- Natural Color.
- Every Stone is Unique.
- Cost-Effective.
- Workability.
- Easy Maintenace.
Disadvantages of Stone
- The weight of the natural stone is heavier than artificial stone, and therefore its use in the building is time-consuming.
- Climate and environmental changes affect the texture of the rock and cause cracking, mildew, and dandruff on the surface.
Classification of Stones
Based on Geology, stones or rocks are classified into three types: Igneous Rocks – Basalt, Trap, Andesite, Rhyolite, Diorite, Granite. Sedimentary Rocks – Lime stones, Dolomite and Sandstones. Metamorphic Rocks – Gneiss, Quartzite, Marble, Slate.
Stone Classification
Scientists put stone into one of three main categories. Those categories are igneous, sedimentary, and metamorphic. Each type of rock is assigned a class by examination of its characteristics.
Geological Classification of Stones
There are three kinds of rock: igneous, sedimentary, and metamorphic. Igneous rocks form when molten rock (magma or lava) cools and solidifies. Sedimentary rocks originate when particles settle out of water or air, or by precipitation of minerals from water. They accumulate in layers.
Explain the Classification of Stones
Stones are classified as per the classification if their parent rocks. Geological classification: Igneous rocks, sedimentary rocks, metamorphic rocks. Physical classification: Stratified rocks, unstratified rocks laminated rocks. Chemical classification: Siliceous rocks argillaceous rocks, calcareous rocks.
Disadvantages of Metamorphic Rocks
Metamorphic rocks have some disadvantages that may make them less desirable for certain applications. Here are some of the main disadvantages of metamorphic rocks:
- Limited Availability
- Difficulty in Extraction
- Limited Diversity
- Lack of Porosity
- Susceptible to Weathering
What Is the Stone?
The stone or stone weight (abbreviation: st.) is an English and imperial unit of mass equal to 14 pounds (6.35 kg). The stone continues in customary use in the United Kingdom for body weight.
Classification of Stones in Civil Engineering
These are igneous, sedimentary and metamorphic. Chemically rocks are classified on the basis of their dominant constituent.
Chemical Classification of Stones
Stones can be classified chemically based on their mineral composition. Here are some examples:
- Silicate Stones
- Carbonate Stones
- Oxide Stones
- Sulfate Stones
- Phosphate Stones
- Native Element Stones
Physical Classification of Stones
Rocks are divided in to three classes according to their geologic formation (mode or process of formation). These are igneous, sedimentary and metamorphic.
Stone and Church Classification
The Stone and Church classification system divides urinary stones into five categories:
- Calcium oxalate stones
- Calcium phosphate stones
- Uric acid stones
- Struvite stones
- Cystine stones
Disadvantages of Igneous Rocks
Disadvantages of many other rock materials, including silica-rich igneous rocks like granites, contain generally low nutrient concentrations and very low solubility. Both characteristics can negatively affect the agronomic effectiveness of short-term crops, particularly in temperate climates.
Advantages and Disadvantages of Stone
Stone Masonry
One of the main advantages of stone is its aesthetic look, with a variety of colors, sizes and textures – the design possibilities are endless. Finally, stone masonry requires little maintenance and repairs, thanks to its durability. Cons: Stone walls are thick and heavy, reducing floor space.
Classification of Good Building Stone
Uses of Building Stones
Marble, granite and sandstone are used for facing work of buildings. Limestone and sandstone are used for general building works. Fine-grained granite, marble, and soft sandstone are used for Carvings and ornamental works. Compact limestone and sandstone are used for Fire-resistant masonry.
Advantages and Disadvantages of Sedimentary Rocks
Advantages of Sedimentary Rocks:
- Fossil fuels
- Building materials
- Soil formation
- Water storage
- Geologic history
Disadvantages of Sedimentary Rocks:
- Weakness
- Limited durability
- Environmental issues
- Limited applications
- Limited availability
Like this post? Share it with your friends!
Suggested Read –
- Stone Joints
- Drypack Concrete
- Types of Buttresses
- Disadvantages of Epoxy Flooring
- What Is Dressing of Stone | Types of Dressing of Stone
- Floating Slab Vs Monolithic Slab | What Is Monolithic Slab | What Is Floating Slab
- RCCFull Form | What Is RCC | Advantages & Disadvantages of Reinforced Cement Concrete | Properties of RCC | What Does RCC Stands for
- What Is a Cavity Wall | How to Build a Cavity Wall | Cavity Wall Detail | Cavity Wall Thickness | Cavity Wall Insulation Pros and Cons | Brick Cavity Wall
- What Is Oblique Drawing | Oblique Drawing Examples | What Is Oblique View | Oblique Projection | Oblique Shape | Cabinet Oblique | What Is Cavalier Drawing
- Which of the Following Is a Way That Slopes Fail | Types of Slope Failure | Geotechnical Failures | Types of Slopes in Geography | Causes of Slope Failure | Slope Stability
- What Is Pier and Beam Foundation | Advantages & Disadvantage of Pier and Beam Foundations | Pier and Beam Foundation Design | How to Build a Post and Pier Foundation
Originally posted 2023-04-26 06:20:29.
Leave a Reply