What Is Mortar | How to Make Mortar | How to Mix Mortar | Uses of Mortar | Cement Mortar in Construction

What Is Mortar?

Mortar is an intimate mixture of inert cementing material, fine aggregates and water. It’s a workable paste which hardens to bind blocks such as brick, stone, concrete block, etc.

It’s mainly used for binding blocks and plastering the masonry surface. Mud, lime, cement or a combination of these three is used as cementing material. Sand is used as a fine aggregate in mortar.

There are different types of mortars in Civil Engineering. They are-

• Cement Mortar
• Lime Mortar
• Mud Mortar
• Special Mortar

How to Make Mortar

At first, we need to measure the quantities of cement and sand. For the essential mix, we use 3 parts sand to 1 part cement.

The right amount of water is needed for mixing purpose. One bag mortar should be mixed with three gallons of water to maintain proper consistency. Proper use of sand and mortar. Fine sand is preferable for preparing the cement mortar.

We require to use lime as an additive material. Lime makes the interconnecting bond stronger. Lime is specifically used in high wind area. We need to remember that if we add lime in the mortar, it will set more quickly.

Also, Read: What Is a Brick Bat Coba |  Procedure of Brick Bat Coba Waterproofing | Advantages &  Disadvantage of Brick Bat Coba Waterproofing

How to Mix Mortar

There are two types of mixture exist in the civil engineering field. They are-

• Hand Mix
• Machine Mix

1. Hand Mix

At first, we stack an amount of sand and the required number of cement bags. Pile of sand should like a small mountain.

Then cut the cement bag and dump the cement on the sand by the trowel or hoe. Next, we need a hoe or a shovel to mix vigorously. We need to remember that mix is distributed uniformly and even coloured. If the mixture is not suitably mixed, then the consistency will be affected.

After that, we form a crater by hoe or shovel and pour water into it. By using a hoe or shovel pick up the dry mix from the outside edge and put it into the middle portion. Sometimes we need to add extra water to the mix.

Finally, mix the mixture for 3 to 5 minutes and let it for another one minute.

2. Machine Mix

At first, we need to wash out or wet the mixer, wheelbarrow and buckets by water. Then, insert the dry materials like sand, stones and cement into the mixer and start mixing.

Finally, we add water into the mix and mix appropriately for a few moments. If there is a lack of water in the mixture, then we add some water. So, this is the entire process of Machine Mix of mortar.

Also, Read: What Is Grade Beam | What Is Grade Beam Foundation | Grade Beam Construction Process |Advantages & Disadvantage of Grade Beam

What Is Mortar Made Of

There are commonly four types of mortars are used. So, the materials are also different for different kinds of mortar.  They are following-

• Cement Mortar
• Lime Mortar
• Mud Mortar
• Special Mortar

#1. Cement Mortar

• Cement (as binding material)
• Sand
• Water

#2. Lime Mortar

• Lime, fat lime or hydraulic lime (as binding material)
• Sand, surki or cinder
• Water

#3. Mud Mortar:

• Clay
• Sand
• Water
• Sometimes fibrous material like cow dung is added, and some amount of (about 5%) hydrated lime and bitumen is added.

#4. Special Mortar

There are many types of special mortar, which are as follows

• Cement Clay Mortar
• Gauged Cement Mortar
• Decorative Mortar

#a. Cement Clay Mortar

• Cement
• Clay
• Water

#b. Gauged Cement Mortar

• Cement
• Lime
• Water (ratio should be 1:1:6, 1:2:9 or 1:3:12)

#c. Decorative Mortar

• Coloured Cement (instead of ordinary cement)
• Sand
• Water

Also, Read: Top 10 Bathroom Fittings & Sanitary Brands India

Uses of Mortar

There are several uses of mortars. Those are following-

• Uses of Cement Mortar
• Uses of Lime Mortar
• Uses of Mud Mortar
• Uses of Special Mortar

1. Uses of Cement Mortar

• To bind masonry blocks like bricks, stones, cement blocks, etc.
• To give a neat and smooth finish to the wall and concrete surface.
• Plastering works in slabs and walls.
• To fill joints and cracks.
• To give pointed joints to masonry works.
• Act as a filler material in stone masonry.
• Act as a filler material in Ferro-cement works.

2. Uses of Lime Mortar

• Fat lime mortar is used for plastering.
• Hydraulic lime mortar is used for construction works.
• This mortar is used where lime is locally available.

3. Uses of Mud Mortar

• Use to construct monolithic structures.
• Masonry works like walls, wattle, daub, etc.
• Use to construct flat roofs, vaults, domes, etc.

4. Uses of Special Mortar

• Use as water resistance material.
• It has a predetermined setting time.
• Use as a decorative finish to the wall surface.

Also, Read: Difference Between Pier and Abutment | What Is Pier | What Is Abutment

Mortar in Construction

In civil engineering construction, mortar is one of the most important things.

• Cement Mortar in Construction
• Lime Mortar in Construction
• Mud Mortar in Construction
• Special Mortar in Construction

1. Cement Mortar in Construction

• To prepare cement mortar, we follow these charts to combine cement and sand for various works.

Compressive strength of mortar is another crucial point. Here is the chart of compressive strength of mortar for different proportion-

2. Lime Mortar in Construction

• In ancient Egypt, there was the first use of lime mortar to construct the pyramids, temples, homes, etc.
• In Mohenjo-Daro, there was actively the use of lime concrete.
• There was also widespread use of lime mortar in Rome & Greece.

3. Mud Mortar in Construction

Nowadays, mud mortar is not used in the construction because of its insufficient strength, but in rural areas, there is still use of mud mortar.

4. Special Mortar in Construction

In current civil engineering construction, there is a massive roll of special mortar. Some of those are-

• Use as water resistance material.
• It has a predetermined setting time.
• Use as a decorative finish to the wall surface.
• It’s also used as a fire-resistant mortar.

So, this is the enormous role played by mortar in civil engineering construction.

Also, Read: What Is a Classified Road | Classification of Roads in India

---

Originally posted 2021-08-07 00:58:02.