What Is Cover in Concrete?
Important Point
Cover in Concrete
The clear cover is the distance between the exposed concrete surface (without plaster and other finishes) to the nearest surface of the reinforcing bar Look into the following image for more detail.
or
The space amid the surface of fixed reinforcement and the outside of concrete of an RCC member is the concrete cover.
Mostly, it describes as “ clear cover” or “minimum concrete cover” in general speaking on construction site.
Also, read: Procedure for Rcc Concrete
Different Types of Concrete Cover Blocks
- Cement Mortar Cover Block
- PVC Cover Block
- Aluminum Cover Block
- Steel Cover Block
- Sto
How to Define Nominal Cover
In simple words, Cover is defined as the small space remain between the outside of the concrete surface to the reinforcement inserted inside of that concrete structure.
Mostly, the thickness of the reinforcement cover is indicated in the structural drawing, or it shall be obtained from a relevant code of practice of minimum concrete cover for reinforcement.
Here all pieces of information about the specifications for reinforcement cover for different structural members in different conditions.
Nominal Cover as Per Is 456 :
As per IS 456(Clause 26.4. 1), the term clear cover is replaced by the term Nominal cover.
The nominal cover is the distance between the exposed concrete surface to nearest reinforcement bar ( it may be any bar main bar, longitudinal bar and even links or stirrups).
Also Read: Slab Constructions
What Is Clear Cover?
The clear cover is the distance between the exposed concrete surface (without plaster and other finishes) to the nearest surface of the reinforcing bar Look into the following image for more detail
What Is Effective Cover?
The effective cover is the distance measured from the face of the member to the centre of the area ( centroid ) of reinforcement, i.e., tension or compression reinforcement. Effective cover = overall depth – effective depth. Or. Effective cover = clear cover + (diameter of bar/2)
Importance of Clear Cover in Concrete:
This sort of thing requires to maintain long-lasting life of the concrete structure or say RCC, some given below to elaborates its importance in structure.
Cover keep reinforcement bars to corrode due to weather’s worse effect. In case of fire, the concrete cover works as a thermal protector of reinforcement bars to shield it.
It provides adequate embedding to reinforcement bars to facilitate them to be stressed without losing grip.
The thickness or size of cover depends on the environmental circumstances and type of various structural members. It shall be obtained from the relevant code of practice.
Also, read: What is Plum Concrete | Application | Mix Design | Methodology
The Concrete Cover Used in Various Parts of the Structure
Clear Cover for Beams :
Clear Cover in Beam
Beam or column, The minimum essential cover thickness usually ranges between 25mm to 35 mm depending on the ecological conditions present during the building’s once-over life.
The 25 mm apply to a dry climate and the 35 mm to a seaside location.
A cover placed in the beam at the bottom and sometimes cover the tie with the side face of steel. Plastic spacers also adaptable instead of concrete cover, according to its size of use.
Spacers with circular shapes preferable, when using the stirrup cage to place the connecting rebar to maintain their position during concrete casting.
Clear Cover for Slabs:
Clear Cover in Slabs
When rebars corrode, the resulting volume spreading out leads to concrete spalling and thus the cracking of the plaster.
Extensive corrosion affects not only the structure’s service life but also the residents’ safety. The minimum cover thickness for slab reinforcement generally between 20 and 30 mm depending on the ecological circumstances present during the building’s service life.
The essential cover is maintained only with the help of a particular structure known as spacers.
These must be unaffected by corrosion and should be positioned approximately every 1.00 m.
Clear Cover for Column
Minimum clear cover to the reinforcement: 25 mm to bars in columns. In large columns, say 450 mm in thickness, the cover should be 40 mm.
Clear Cover for Footings:
Clear cover in footings
Mostly in the case of footing structure, it directly relies on ground or soil, or in some cases, the PCC layer is there to get hard and level surface for mesh made by reinforcing bars.
This mesh rests on concert cover to maintain space between soil or bar to filled concrete in it, hence typically covered used is 70mm and 50 mm for PCC.
The minimum necessary cover thickness in the foundation reinforcement is around 40 mm for the foundation set on a concrete layer and approximately 70 mm for the foundation, which comes in touch with the soil.
The essential covering may be formed by a point or by linear spacers.
Also, read: What Is Guniting, Set Guniting Systems , Advantage, Disadvantage
Allowable Concrete Cover for Reinforcement in all kind of structure:
The terms for reinforcement cover for various types of structural members in different circumstances given underneath.
According to relevant code, the concrete cover must have a minimum size of 25 mm, or less than twofold of the diameter of the bar should be provided. It should be placed at the end of the reinforcing bar.
In a beam, longitudinal reinforcement bars size shall not less than 30 mm or lesser compared to the diameter of the bar.
In the case of a longitudinal reinforcement bar in a column, the size of concrete cover not less than 40 mm or minimum of bar diameter whichever provided.
In this kind of case like, the dimension of Colum is 20 cm or less than the size of columns.
In this case, the reinforcement bar’s diameter does not exceed 12 mm, where the concrete cover of 25 mm is applicable for reinforcement.
When structure experiences tension, compressive shear, or other stresses, reinforcements bars in a slab or wall should not less than 15 mm and not less the diameter of the bar.
Where concrete structures outer face comes in direct contact with the weather or the ground after removing formwork, likewise footing sides, grade beams, retaining walls, and top slab, etc. its cover should not be less than 50 mm.
In unusual cases like concrete cover for footing, and main structural members where concrete filling directly comes in contact with soil or ground, 75 mm size is minimum for the cover of the bottom reinforcements bars.
When concrete is poured on the PCC layer, the cover size may be decreased up to 50 mm.
The area of constructions, where concrete works always in touch with marine weather or experiences harmful chemical attacks on the outer body. The only way is to an Increased cover thickness to protect surfaces exposed to the action of toxic chemicals (or exposed to ground polluted through such chemicals)smoke alkali, acid, saline atmosphere, sulfur, etc.
Retaining structures like retaining wall at the seashore, swimming pool, structure nearby rivers where the minimum cover to all-steel bars shall be 40mm or equal to the diameter of the main bar, whichever is greater.
In the direct contact of seawater and waters with destructive content and oils, the covers shall be increased by 10 mm.
Sheltering the reinforcement bars in case of concrete exposed to the damaging atmosphere also be given by only if an intense impervious concrete with standard defending coatings.
The accurate cover shall be maintained by cement mortar cubes and other permitted resources.
EIC allocated precast concrete block structure for reinforcements for footings, grade beams, and slabs on a sub-grade shall be rest on it.
Some time unskilled labor used pebbles or stones instead of concrete cover; however, all those things shall not be acceptable.
The minimum clear cover between reinforcing bars shall be in match with IS:456 – 2000 code of practice.
Clear Cover and Effective Cover
The effective cover is the distance between the outermost compression face of RCC to the centre of the area of main reinforcement in tension.
Hence effective cover = Clear cover + Total Diameter of Stirrup (d)+ (Diameter of main reinforcement bar (D))/2
Minimum Cover for an RCC Column
Concrete Member | Minimum Cover |
---|---|
Slab | 20mm |
Beam | 20mm |
Column | 40mm for d>12mm 25mm for d<12mm |
Footing | 50mm |
Nominal Cover to Meet the Requirements for Durability:
Exposure | Nominal Concrete cover (in mm) not less than |
---|---|
Mild | 20 |
Moderate | 30 |
Severe | 45 |
Very severe | 50 |
Extreme | 75 |
Clear Cover
The clear cover is the distance between the exposed concrete surface (without plaster and other finishes) to the nearest surface of the reinforcing bar Look into the following image for more detail. In the following picture, Clear cover is clearly illustrated.
Clear Cover for Column
The size of clear cover of column should be ranging between 40mm to 50mm. Clear cover of size 40 mm is good for dry weather condition and 50 mm for wet moist weather condition.
Clear Cover of Slab
The size of clear cover of slab should be ranging between 20mm to 30 mm. Clear cover of size 20mm apply for 4 to 5 inch thick rcc slab, 20mm for flat slab and 30mm for 6 inch thick slab.
Beam Cover
The American code Institute (ACI – 318 -11 detail about cover for beam, it stated that minimum thickness of cover for beam should be 35 mm in case of rebar size less than 8 (25mm) number of bar in dry weather condition, and minimum cover of 40 mm should be used in case of wet moist weather condition.
What Is Cover in RCC?
The effective cover is the distance between the outermost compression face of RCC to the centre of the area of main reinforcement in tension.
What Is Cover for Slab?
The minimum required cover thickness for slab reinforcement usually ranges between 20 and 30 mm depending on the environmental conditions present throughout the building’s service life. The 20 mm would apply to a dry climate and the 30 mm to a seaside location.
What Is Cover Column?
Beam or column, The minimum essential cover thickness usually ranges between 25mm to 35 mm depending on the ecological conditions present during the building’s once-over life. A cover placed in the beam at the bottom and sometimes cover the tie with the side face of steel.
Is 456 a Column Cover?
As per IS 456:2000 (Clause 26.4. 1), the term clear cover is followed by Nominal cover. The nominal cover is the distance measured between the exposed concrete face and the nearest steel reinforcement, even links ( Column ties or shear stirrups).
Is 456 a Minimum Cover?
The required minimum cover for steel reinforcement should follow the code IS 456:2000 or as indicated in the drawing.
Minimum Concrete Cover
The minimum concrete cover requirements are based on exposure conditions and rebar size. In your case, the slab is not exposed to weather or in direct contact with ground, allowing for the 3/4-inch cover, provided the rebar is No. 11 or smaller.
What Is Minimum Cover?
Concrete cover for reinforcement is required to protect the rebar against corrosion and to provide resistance against fire. The thickness of cover depends on environmental conditions and type of structural member.
What Is Cover in Footing?
The clear cover is the distance between the exposed concrete surface (without plaster and other finishes) to the nearest surface of the reinforcing bar Look into the following image for more detail.
What Is Clear Cover in RCC?
Clear cover is the distance measured from the exposed concrete surface (Without plaster and other finishes) to the nearest surface of the reinforcing bar.
Where Is Cover Block Used?
Cover blocks are used for the many following reasons: Maintain a specified distance between the rebar and the shuttering. To protect the steel reinforcement bars from environmental effects to prevent their corrosion. Provide thermal insulation, which protects the reinforcement bars from fire.
What Is Cover Block in RCC?
A cover block is essentially a spacer that is used to lift the rebar matrix off the ground so that concrete may flow underneath the rebar. In order to prevent corrosion of the rebar, it needs to be fully embedded in concrete. By code, it usually needs about 2 to 3 inches of coverage on all sides.
Is a 456 2000 a Clear Cover?
As per IS 456:2000 (Clause 26.4. 1), the term clear cover is followed by Nominal cover.
Does Code Concrete Cover?
The American code institute (ACI 318-11) provides minimum concrete cover thickness for different elements of reinforced concrete structure. The code allows the use of cover thickness smaller than those provided in Table-1 for precast concrete members.
What Is Clear Cover for Slab?
The size of clear cover of slab should be ranging between 20mm to 30 mm. Clear cover of size 20mm apply for 4 to 5 inch thick rcc slab, 20mm for flat slab and 30mm for 6 inch thick slab. Slab cover:- the size of clear cover for slab should be ranging between 20mm to 30 mm.
Concrete Cover for Columns
The minimum required cover thickness for column rebars usually ranges between 25 and 35 mm depending on the environmental conditions present throughout the building’s service life. The 25 mm apply to a dry climate and the 35 mm to a seaside location.
Where Is Cover Block Used?
Cover blocks are used for the many following reasons: Maintain a specified distance between the rebar and the shuttering. To protect the steel reinforcement bars from environmental effects to prevent their corrosion. Provide thermal insulation, which protects the reinforcement bars from fire.
Why Cover Blocks Are Used?
“Concrete cover, in reinforced concrete, is the least distance between the surface of embedded reinforcement and the outer surface of the concrete (ACI 130).” Concrete cover protects the reinforcement from corrosion, insulates the steel from extreme heat such as fire, and it ensures the reinforcement can be actively engaged without slipping when loaded.
Why Clear Cover Is Provided?
It is required for protecting the rebar against erosion and providing protection against fire. Clear cover is mainly the actual distance from the bottom of fibre to the bottom level of the reinforcement.
Is Code for Cover in Concrete?
Adequate cover is required for any reinforced concrete structure in order to protect it from corrosion. Indian code (IS 456: 2000) has specified the cover based on durability requirement as well as for fire requirements.
What Is Effective Cover in RCC?
The effective cover is the distance between the outermost compression face of RCC to the center of the area of main reinforcement in tension.
What Is Cover and Clear Cover?
Effective cover is the distance measured from the face of the member to the center of area ( centroid ) of reinforcement, i.e., tension or compression reinforcement. Effective cover = overall depth – effective depth. Or. Effective cover = clear cover + (diameter of bar/2)
Does Oxiclean Clean Concrete?
The active ingredient in OxiClean is sodium percarbonate, a powder that, when mixed with water, releases hydrogen peroxide The powder mixes best into warm-to-hot water. Mop that onto the walkway and wait five to 30 minutes. During that time, you can scrub the concrete to make the cleaning more effective.
What Product Cleans Concrete?
Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete0
What Is Clear Cover in Footing?
Concrete structure cast against permanently in contact with ground such as footing, the ACI Code specified that the size of concrete cover for footing should be at least 75 mm.
How Is Cover Block Calculated?
The number of cover blocks required can be calculated by dividing the total length of bar by spacing of cover blocks. In slab both the spacing i.e in X and Y direction are must for the total calculation.
How Is Clear Cover Calculated?
The effective depth is measured from the face of the member to centre of area of main reinforcement. Hence, Effective cover = Clear cover + (Dia of Stirrups/links) + (Dia of main reinforcement bars) + 0.5*(spacing between bars).
What Is the Use of Clear Cover?
Clear cover is the distance measured from the exposed concrete surface (Without plaster and other finishes) to the nearest surface of the reinforcing bar.
What Is Cover Block in Column?
A cover block is essentially a spacer that is used to lift the rebar mesh off the ground so that concrete may flow under the rebar.
What Is Clear Cover in Concrete?
Clear cover is the distance measured from the exposed concrete surface (Without plaster and other finishes) to the nearest surface of the reinforcing bar.
What Is Clear Cover in RCC Slab?
Clear cover in RCC, is the distance between the outer surface of the concrete and the surface of the reinforcement bar. The cover is provided to protect the reinforcing bar from corrosion and fire.
What Is Footing Concrete Cover?
“Concrete cover, in reinforced concrete, is the least distance between the surface of embedded reinforcement and the outer surface of the concrete (ACI 130).” Concrete cover protects the reinforcement from corrosion, insulates the steel from extreme heat such as fire, and it ensures the reinforcement can be actively engaged without slipping when loaded.
What Is Effective Concrete Cover?
The effective cover is the distance between the exposed concrete surface to the centroid of the main reinforcement. ( or) The effective cover is the distance between the outermost compression face of RCC to the center of the area of main reinforcement in tension.
What Is Minimum Concrete Cover?
The cover for an individual reinforcing bar is the minimum thickness of concrete between the surface of the bar and the fire-exposed surface of the beam. For beams in which several bars are used, the cover for corner bars used in the calculation shall be reduced to one-half of the actual value.
Why Do We Need Concrete Cover?
Concrete cover is crucial in order to protect the reinforcing steel from corrosion caused by environmental effects. Although concrete cover protects reinforcement from environmental factors, it also protects the structural reinforcement during a fire.
Minimum Concrete Cover for Rebar
For bar bundles the minimum cover must equal the equivalent diameter of the bundle but it need not be more than two inches or the tabulated minimum, whichever is greater.
How Do You Cover Exposed Rebar?
A specialty protective coating containing anti-corrosive agents is applied to the exposed metal to prevent further damage. After this material has set, fresh mortar can be applied to fill the gap and in effect cover the exposed rebar.
What Can You Cover Concrete With?
Cover Your Concrete Patio – Ideas
- Fake a concrete patio cover up with stain
- How to cover your patio with paint and make it look like tile
- Use pavers to cover your concrete patio
- Use tile to cover a concrete patio
- Concrete patio idea – cover up with a deck!
- Another concrete patio cover up using stain
What Is the Clear Cover for Footing?
Clear cover of footing: The size of clear cover of footing should be 40 mm to 75 mm. Clear cover size 40mm is used for general footing, clear cover of size 50mm is apply for Raft foundation top and 75mm for raft foundation bottom/side.
How Do You Cover a Drywall Beam?
Can I Pour Concrete Over Concrete?
You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.
What Does Cover Mean in Concrete?
Concrete cover, in reinforced concrete, is the least distance between the surface of embedded reinforcement and the outer surface of the concrete (ACI 130). The concrete cover depth can be measured with a cover meter.
How Do I Choose a Concrete Cover?
- In slab and wall have the thickness. 100 mm and thinner 10 mm (15mm) Above 100 mm 15mm (20mm)
- In beams and spandrel with height: Lower than 250mm 15mm (20mm) Equal or higher 250 mm 20mm (25mm)
- In columns: 20mm (25mm)
- In foundation beams 30 mm.
- In foundation: Precast footings 30mm.
What Is Function of Concrete Cover?
“Concrete cover, in reinforced concrete, is the least distance between the surface of embedded reinforcement and the outer surface of the concrete (ACI 130).” Concrete cover protects the reinforcement from corrosion, insulates the steel from extreme heat such as fire, and it ensures the reinforcement can be actively engaged without slipping when loaded.
What Is the Maximum Concrete Cover?
There is no maximum cover, but the combination of inherent shrinkage and other factors may make excessive cover break away from underlying concrete (at the cage, typically.) I prefer to avoid using cover as part of my critical embedment.
What Is the Concrete Cover for Column?
The minimum required cover thickness for column rebars usually ranges between 25 and 35 mm depending on the environmental conditions present throughout the building’s service life. The 25 mm apply to a dry climate and the 35 mm to a seaside location
What Is the Maximum Concrete Cover?
There is no maximum cover, but the combination of inherent shrinkage and other factors may make excessive cover break away from underlying concrete (at the cage, typically.) I prefer to avoid using cover as part of my critical embedment.
What Is the Importance of Cover in RCC?
“Concrete cover, in reinforced concrete, is the least distance between the surface of embedded reinforcement and the outer surface of the concrete (ACI 130).” Concrete cover protects the reinforcement from corrosion, insulates the steel from extreme heat such as fire, and it ensures the reinforcement can be actively engaged without slipping when loaded.
What Is the Concrete Cover for Footing?
For footings and other principal structural members in which the concrete is deposited directly against the ground, cover to the bottom reinforcement shall be 75 mm. If concrete is poured on a layer of lean concrete, the bottom cover maybe reduced to 50 mm.
What Is the Minimum Cover for Column?
The minimum required cover thickness for column rebars usually ranges between 25 and 35 mm depending on the environmental conditions present throughout the building’s service life. The 25 mm apply to a dry climate and the 35 mm to a seaside location.
Should I Cover New Concrete If It Rains?
Then there’s the problem of rain. If there’s a severe downpour and too much groundwater gets into the concrete, the concrete will weaken. … If the concrete has time to set and you can keep the penetrating water from getting to it, this will keep your pour from becoming weak. So, keeping it covered is crucial.
Should You Cover Concrete with Plastic?
Covering the curing concrete with plastic keeps it cleaner, but there is a more important purpose behind this practice. The drying, or “curing,” should be gradual, otherwise cracking may occur.
What Is the Best Way to Clean Concrete?
Mix 1/2 cup baking soda to one gallon of water for a gentle cleaning solution. Add 1/8 cup of liquid dish detergent. Spray on patio surface, let sit for 30 minutes, then scrub and rinse. For heavily stained or mildewed patios, you may need a pressure washer.
What Is the Advantage of Concrete Cover?
“Concrete cover, in reinforced concrete, is the least distance between the surface of embedded reinforcement and the outer surface of the concrete (ACI 130).” Concrete cover protects the reinforcement from corrosion, insulates the steel from extreme heat such as fire, and it ensures the reinforcement can be actively engaged without slipping when loaded.
What Is Concrete Cover for Reinforcement?
“Concrete cover, in reinforced concrete, is the least distance between the surface of embedded reinforcement and the outer surface of the concrete (ACI 130).” Concrete cover protects the reinforcement from corrosion, insulates the steel from extreme heat such as fire, and it ensures the reinforcement can be actively engaged without slipping when loaded.
How Many Types of Cover Blocks Are There?
Cover blocks (spacer blocks) are broadly divided into two main types based on the materials used in its manufacturing process.
What Should Be Minimum Cover for Footing?
For footing, minimum cover should be 25 m, 35 mm.
What Is the Minimum Concrete Cover for Rebar?
For bar bundles the minimum cover must equal the equivalent diameter of the bundle but it need not be more than two inches or the tabulated minimum, whichever is greater.
What Is the Effect of Cover Thickness in Concrete?
Large cover depths (50–75 mm) are required to protect reinforcement against corrosion in aggressive environments, but thick cover leads to increased crack widths in flexural reinforced concrete members.
What Is the Clear Cover for Column Reinforcement?
Clear cover for column: The size of clear cover for column should be ranging between 40mm to 50mm. Clear cover of size 40 mm is good for dry weather condition and 50 mm for wet moist weather condition.
How Do You Calculate Concrete for a Column Cover?
- The volume of Concrete = Area of rectangle x Depth.
- The volume of concrete = Surface Area x Depth.
- The volume of concrete for circular column = Surface Area of Circle x height of the column.
- Part1: It is in a rectangular shape with the following dimensions length=1.0m, breadth=0.8m and depth=0.4m, The volume of 2 nd part = 1.0 m x 0.8 × 0.4 = 0.32m3.
- Part2: Volume of concrete = 1.2 x 1 x 0.1 = 0.12m3,Total volume of concrete required for footing= 0.32 + 0.12 = 0.44m3
What Is the Minimum Cover in Concrete of Seawater?
For example, for reinforced concrete member subjected to sea water, the ACI code specifies that thickness of concrete cover should be at least 50mm. It is desired to set minimum thickness of concrete cover as 65mm to account for possible construction errors and hence make sure that 50mm cover thickness is achieved.
What Is the Difference Between Cover and Clear Cover?
As per IS 456(Clause 26.4. 1), the term clear cover is replaced by the term Nominal cover. The nominal cover is the distance between the exposed concrete surface to nearest reinforcement bar ( it may be any bar main bar, longitudinal bar and even links or stirrups).
What Is the Clear Cover for Foundation Slab and Beams?
The size of clear cover 40mm is apply for column, 25mm for beam, 15 to 20 mm for slab, 15mm for staircase and 40 to 50mm for foundation.
What Is the Maximum Spacing of Main Bars in a One Way Slab?
The diameter of bar generally used in slabs are: 6 mm, 8 mm, 10 mm, 12mm and 16mm. The maximum diameter of bar used in slab should not exceed 1/8 of the total thickness of slab. Maximum spacing of main bar is restricted to 3 times effective depth or 300 mm whichever is less.
What Happens When There Is Not Enough Cover in a Concrete Member?
Covers are given to provide protection against corrosion and fire to the rebars. If less cover is provided, protection against the above will be inadequate. And if more than required is provided then the concrete on the tension side of any structural member, will crack under tension.
What Is the Minimum Requirements of Concrete Covering for Beams and Columns?
Beam or column, The minimum essential cover thickness usually ranges between 25mm to 35 mm depending on the ecological conditions present during the building’s once-over life. The 25 mm apply to a dry climate and the 35 mm to a seaside location.
What Is the Minimum Concrete Cover of Cast in Place Columns Not Exposed to Weather?
Minimum Cover For Reinforcement in Cast-In-Place Concrete:
Sl. No. | Conditions | Minimum cover (inches) |
1 | Concrete cast against and permanently exposed to earth | 3 |
2 | Concrete exposed to weather or earth | 2 |
1 ½ | ||
3 | Concrete unexposed to weather or in contact with the ground. | 1 ½ |
Like this post? Share it with your friends!
Suggested Read –
- Difference Between Lap Length and Development Length
- Difference Between M Sand Vs River Sand | What is M-Sand & River Sand
- Difference Between Footing and Foundation | What is Footing and Foundation
- Difference Between OPC Vs PPC | What is Cement | OPC Cement | PPC Cement
- Difference Between Short Column and Long Column | What Is Column | Type of Column
- Difference Between Flexible Pavement and Rigid Pavement | What is Pavement | Type of Pavement
Hello there! This is kind of off topic but I need
some help from an established blog. Is itt hard too set up yourr own blog?
I’m not very techincal but I can figure things outt pretty quick.
I’m thinking about creating my own but I’m not sure where tto begin. Do you have any tips or suggestions?
Thanks