Hand Level Surveying
Important Point
Hand level is the device that is generally used by grading contractors and land surveyors. Hand level is worked by comparing multiple points against a reference point to found a height or horizontal distance.
Hand level surveying is ideal for preliminary land survey work, simple distance measurement or any other site job.
Hand level surveying saves our valuable time because it does not require a tripod stand or levelling instrument setup. Hand level surveying is a quick process that’s why contractors use it widely. Hand level is also known as sight level, pocket level and Abney level.
What Is Site Level?
Hand level and Site-level is the same instrument. Different names present them. Sometimes it called also Hand Site level. Hand level is a tool that is used for rough levelling, that is an estimation and not for precision.
Hand level instrument held by hand and used for approximate work at a small distance. Hand level is suitable for cutting and filling grading job and levelling of any ground surface.
Hand level is a spirit level which is fixed in the telescope. Hand level is worked by comparing multiple points against a reference point to found a height or horizontal distance.
Hand sight levels are ideal in that type of projects which including bricklaying, fencing, laying lawn, etc. Hand levels required less time as compared to another levelling instrument by setting and levelling.
Nowadays, most projects around the houses require hand sight level for estimation purpose; this could be helpful by using a hand sight level.
Useful Article for You
- What Is a Contour Interval
- What Is Tile
- What Is the Difference Between a Shower Pan and a Shower Base?
- What Is a Window Panel
- Type of Arch
- What Is a Frame Structure
- What Is the Measurement for a Queen Size Bed
- What Is Considered Livable Space
- What Is One Way You Can Save Electricity?
- What Is Mdf Mean
- Bearing Surveying
- What Is a Bundle of Shingles
- What Is a Gallon of Water Weigh
- What Is SuperelevationWhat Is Overhang
- What Is Sand Blasting
- What Is a Span Bridge
- What Is the Little Black Diamond on a Tape Measure
- What Is a Louvered Door
- What Is Leveling
- What Is Pedestal
- What Is Abutment
- What Is Plumbing Fixtures
- What Is Slab Construction
- What Is Calacatta Quartz
- What Is Auxiliary View
- Sheepsfoot Roller
- Live Load Vs Dead Load
- What Is 1 Flight of Stairs
- What Is Refractory Cement
- Dry Pack Concrete
- What Is Luminous Flux Vs Lumens
- What Is a Frost Wall
- What Is an Undercoat
- What Is Road Pavement
- Arch Foundation
- What Is a Stair Landing
- What Is Stone Masonry
- What Is a Spandrel Beam
- What Is Pier and Beam Foundation
- What Is Levelling
- What Is a Pile Cap
- What Is a Mat Foundation
- What Is a Floating Slab
- What Is the Purpose of Foundation
- What Is Modulus of Rupture
- What Is a Flush Door
- What Is Residential Construction
- What Is a Concept Sketch
- What Is the Best Foundation for a House
- What Is Oblique Drawing
- What Is a Benchmark in Surveying
- What Is a Engineering Drawing
- What Is an Admixture
- What Is a Monolithic Slab Foundation
- What Is the Standard Size Water Supply Line
- What Is the Difference Between Tension and Compression?
- What Is a Caisson in Construction
- What Is a Tremie
- What Is Tributary Area
- What Is Shoring Construction
- What Is a Cason
- What Is Wall Putty
- What Is the Difference Between Mortar and Concrete
- What Is Bhk
- What Is Sbc of Soil
- What Is Plinth Level
- What Is Water Proofing
- What Is Mix Design of Concrete
- What Is Fine Aggregate
- What Is Retention Money
- What Is Design Mix
- What Is Isometric Scale
- What Is Development Length
- What Is Superelevation
- What Is Wall Made Of
- What Is Gypsum Board
- Types of Vaulted Ceilings
- What Are Forms in Construction
How to Use a Hand Level?
It’s one of the easy instrument to handle. So, it can easily be operated by anyone. The steps to use a hand level are-
At first, we need to hold the device at eye level and look through a small opening of the hand level instrument. Secondly, you must make sure that you should not cover the spirit vial when you are holding the instrument.
After that, depending on the reference point, you need to raise the lower front end of sight level until the bubble of spirit level fixed in the centre of the centre line in the viewing window.
Then once the bubble centre to the centre line of the instrument, we found the level from that. Finally, one of the essential things is if you hold the instrument in a table or other plane surface station it will give you a more accurate reading despite the previous one because by this method the device is resting steadily.
Also, Read: Difference Between Pier and Abutment | What Is Pier | What Is Abutment
Estimating Distance with a Sight Level
A sight level is also used with sighting rod. It is used for estimating distances between the user and the object
Procedure for Estimating Distance with a Sight Level
- At first, you need to look through the device. Then we need to note down the top and bottom lines of the viewing window. Generally, the ratio of bottom and top is 1:12.
- Here is an example, if a user looks through sight level of the instrument and sees the top line at six fleet’s of the rod and bottom line at three fleets, so the user is 36 feet away from the rod.
Also Read: Level Survey
- Here you observe how to calculate the problem.
- First, we are going to find the difference between the two distances in the viewing window; it’s just 6 – 3 = 3. After that, we calculate the difference and multiply by 12.
- It’s done because to convert from thee distance ratio to the actual distance, that is 3 x 12 = 36.
So, it’s the whole process of hand level, use of hand level and estimating distance through this instrument.
Also, Read: Brick Masonry Calculator | Brick Masonry Calculator | Size of Bricks | Calculate Brick Work
Hand Level
A hand level (also called a sight level or hand sight level) is a tool used for ‘rough leveling’ – that is, estimation and not precision. A hand level is essentially a spirit level inside of a telescope.
Hand Level Surveying
A hand level is essentially a spirit level inside of a telescope. The device is generally used by grading contractors and land surveyors to compare multiple points against a reference point to get approximations of level or distance. Hand levels save time compared to setting up a tripod and levelling instrument.
Hand Sight Level
A hand level (also called a sight level or hand sight level) is a tool used for ‘rough leveling’ – that is, estimation and not precision. A hand level is essentially a spirit level inside of a telescope.
What Is Hand Level?
A surveyor’s level designed to be held in the hand and consisting of a telescope with a bubble tube so attached that the position of the bubble can be seen when looking through the telescope.
What Is Site Level?
- Site levels are the bare minimum you’ll require to competently prepare a building design on a site.
- We suggest you get these before you put pen to paper (or mouse to mouse pad). It can save a lot of horsing around later.
Like this post? Share it with your friends!
Suggested Read –
- Top 10 Tiles Companies in India 2020
- What Is Plaster | Requirement of Good Plaster | Types of Plasters
- What Is Beam Bridge | Types of Beam Bridges | Beam Bridge Works | Advantages & Disadvantages of Beam Bridges
- What Is Hydraulic Cement | Hydraulic Cement Uses | How to Apply Hydraulic Cement | Advantages & Disadvantages of Hydraulic Cement
- What Is Rock Cycle | Types of Rocks | Processes in the Rock Cycle | What Are the Steps of the Rock Cycle | Uses of Rocks in the Construction
- What is Waffle Slab| Waffle Slab Details | Advantages & Disadvantages Waffle Slab | Waffle Slab Design | Construction of Waffle Slab
Nice read, Krunal! I just started working in a business that sells surveying equipment. For someone with zero knowledge with levels, I find this article really helpful.
Thanks for sharing! 🙂